Turning Panos On and Off via the iGUIDE Portal

How to Enable or Disable a pano (hotspot) on the iGUIDE portal

Step-By-Step Instructions

Enabling/Disabling a Pano

If you forget to disable (hide) a scan (sometimes referred to as a pano) within Stitch, you can process this change on the portal for your iGUIDE. This can only be completed once the iGUIDE has been published. To do this, follow the steps outlined below:

1. Log into the iGUIDE Portal.

2. Find the iGUIDE that needs to have pano(s) disabled.

3. Click the blue Edit button. See Figure 1.

Figure 1 - Choosing an iGUIDE to edit

1. Scroll down, and under the Preview, double-click the pano (green circle) you want to disable; it will change to a red circle, indicating that this pano is disabled. See Figure 2. Your panorama will also reflect that it is disabled with a small banner across the centre.

Figure 2 - Enabled vs disabled pano indicator

1. Once the required panos(s) have been activated or deactivated, click the blue Save button at the bottom of the page. See Figure 3.

Figure 3 - Saving your edits