Changing & Adding Labels

This Article explains how to modify a room label or add a new label on the iGUIDE Portal.

Step-By-Step Instructions

Changing labels on floor plans

This section explains how to change/modify a label on the iGUIDE Portal, and what you can modify:

• Show Room Details in iGUIDE: Display room in the iGUIDE Details Tab

• Label: Set the Label text

• Font Size (viewer only): Set the font size for the label in the iGUIDE 3D Tour. This does not affect the PDF Floorplans, DXF etc.

• Show Dimensions: Display the room's dimensions on the Details Tab.

• Show Room Area: Display the room area on the Details Tab.

• Room Type: Select the room type.

• Room Flag: Change the room flag to apply the Included/Excluded/Exterior properties. Selecting a Room & Flag for more details.

If a room label requires a change or modification in any way then follow these steps:

1. Log in to the Portal manage.youriguide.com.

2. Go to My iGUIDEs and find the iGUIDE that needs to be edited and click Edit.

3. Scroll down to Editor.

4. Click on the pencil icon that is beside the label which needs to be updated, modified, or changed. See Figure 1.

   

   Figure 1: Selecting a label to edit
5. You will see a pop-up on top of the 3D Tour area, here you can change the label text in the provided pop-up and click the blue Ok button, (make sure to use all capital letters for consistency) You may also enable/disable measurements for each room here. See Figure 2.

   

   Figure 2: Editing a label
6. You can also change the floor labels from this page, simply select the pencil icon next to the floor name to modify. See Figure 3.

   

   Figure 3: Selecting a Floor label
7. You may also modify the properties of the floor here, such as the Perimeter Wall Thickness, or mark a floor as Below Grade.

8. Once the label has been changed click the Save button at the bottom of the page. See Figure 5.

   

   Figure 5: Saving your work

Adding a Custom Label to your floor plan

This section will guide you through adding a custom label to an iGUIDE Floorplan.

1. Click on the Actions button, which can be found above the iGUIDE on the "Edit Default View" page.

2. Click on "Add New Label"

3. Move the label to the desired location by clicking on the Arrow Cross, and dragging.

FYI: Custom labels can not be rotated.

Figure 7: New Label Config