Setting the initial pano & angle

How to set the initial pano and angle of an iGUIDE.

Step-By-Step Instructions

Setting the Initial Pano

1. Log into the iGUIDE Portal.

2. Find the iGUIDE that needs to have its initial view changed or edited.

3. Click the blue Edit button.

4. Scroll down and under the ”Preview” section select the pano (green circle) that you want as the initial pano.

5. Select "Actions" on the floorplan area, and click "Set Initial Pano".

Setting the initial pano & angle

Figure 3 - Preview of selecting a new initial pano

1. Select the pano you wish to edit & rotate the scan to the angle you wish to set..

2. Once chosen, click on Set Initial Angle (1)

3. Click on “Actions” (2) then “Set Initial Pano” (3)

   Note: If you are setting an Initial angle for all panos, do not select this option unless you wish for the iGUIDE to begin with the selected pano.

4. Click on the blue Save button (4) to save the panorama.

5. When you click Save, the 3D Tour will flick back to the Starting pano you have set. You may then click on the pano to confirm your initial angle was saved.

Note: if your initial pano and angle do not update after refreshing the iGUIDE, you may need to clear your browser's cached data.

Setting the initial pano angle in Stitch

You can also set the initial pano angle in Stitch prior to uploading, see Setting the Initial Pano and Pano Angle in Stitch