PLANIX R1 Sounds

When operating your iGUIDE camera system, audible tones provide key feedback during the scanning process. These sounds help guide workflow and ensure that you only move at appropriate times.

Beep!

9KB

Beep!.m4a

Open

Beep is the first tone after clicking the capture button. This tone indicates that the capture is complete.

You may now safely move the camera, doing so will not affect the image or LiDAR data.

Note: Data processing may still happen in the background even though capture is done.

Duh-doo!

9KB

Duh-doo!.m4a

Open

Duh-doo is the second tone after clicking the capture button. This tone means the shoot button is reactivated, and the system is ready for the following scan. At this point, the preview image will become visible.

Combined Audio

By comparing the time between the beep and the duh-doo, you can assess the processing delay between scan completion and camera readiness for the following capture.

32KB

Combined Audio.m4a

Open

Important Note on Noise Reduction (NR)

When Noise Reduction is enabled, the second tone (duh-doo!) will not be heard.

To verify both tones, test using the following setup:

1. Set the camera to HDR mode.

2. Disable Noise Reduction.

3. Ensure your phone volume is up and Silent/Do Not Disturb is turned off.